Email this article 
Analisis Karier Jabatan Operator CNC Lulusan SMK Teknik Pemesinan pada Industri Manufaktur
Abstract
Abstract: VHS Graduated in the manufacturing industry occupies the job of CNC Operator position. The demands needs are in the manufacturing sector, labour has to professional competence. This study aims to identify and describe careers in the VHS Graduated Mechanical Engineering Program of CNC Operator Position. This study uses qualitative research, a multicast study type of research. The results of the research, include: (1) the work and competence of CNC Operator position, sets the machine, make programs, operates the machine; (2) incentives of CNC Operator position, obtained based on grade and holiday incentives; (3) salary of CNC Operator position, range earned by a technician is above the UMK in which area the industry is located.
Abstrak: Lulusan SMK pada industri manufaktur menempati pekerjaan pada jabatan Operator CNC. Tuntutan dalam kebutuhan industri pada bidang manufaktur fabrikasi menghendaki seluruh karyawan mempunyai kompetensi yang profesional. Tujuan dari penelitian ini, mengidentifikasi dan mendeskripsikan karier jabatan Operator CNC pada lulusan SMK Teknik Pemesinan. Penelitian ini menggunakan pendekatan kualitatif dengan jenis penelitian multikasus. Berdasarkan hasil penelitian didapatkan (1) pekerjaan dan kompetensi Operator CNC, yang meliputi pekerjaan: mengeset mesin CNC, pembuatan program, dan mengoperasikan mesin CNC; (2) Insentif yang didapatkan pada jabatan Operator CNC, meliputi insentif berdasarkan grade dan insentif hari raya; (3) rentang gaji yang didapatkan oleh jabatan Operator CNC menyesuaikan UMK daerah industri berada.Keywords
Full Text:
PDFReferences
Abizar, H., Fawaid, M., & Nurhaji, S. (2020). Pelatihan Pengoperasian Mesin CNC Berbasis Swansoft Simulator Kepada Siswa Teknik Pemesinan di Kota Serang. Pengabdian Pada Masyarakat, 5(2), 309–318.
Akyazi, T., Goti, A., Oyarbide-Zubillaga, A., Alberdi, E., Carballedo, R., Ibeas, R., & Garcia-Bringas, P. (2020). Skills requirements for the European machine tool sector emerging from its digitalization. Metals, 10(12), 1–23. https://doi.org/10.3390/met10121665
Balza, F., & Vladimir. (2018). The deregulation of the salary benefit factors as a competitiveness strategy in Colombia. Clío América, 12(23), 87. https://doi.org/10.21676/23897848.2620
Barrick, R. K. (2019). Competence and Excellence in Vocational Education and Training. Handbook of Vocational Education and Training, 1155–1166. https://doi.org/10.1007/978-3-319-94532-3_64
BNSP. (2017). Badan Nasional Standar Profesi (Program Keahlian Teknik Pemesinan). Sertifikasi Program Keahlian. https://bnsp.go.id/
Bonvin, J.-M. (2019). Vocational Education and Training Beyond Human Capital: A Capability Approach. Handbook of Vocational Education and Training, 273–289. https://doi.org/10.1007/978-3-319-94532-3_5
Chaudhry, M. S., Sabir, H., Rafi, N., & Kalyar, M. N. (2017). Exploring the Relationship between Salary Satisfaction and Job Satisfaction: A Comparison of Public and Private Sector. The Journal of Commerce, 3(4), 1–14.
Darmawang., Syafrudie, H. A., Tuwoso., & Yahya, M. (2017). Analysis of Interests Level of Employability Skills Indicators in Automotive Business Activities by Labor Graduate of SMK in Makassar City , Indonesia. The International Journal of Science & Technoledge, 5(9), 132–137.
DiBenedetto, C. A. (2018). Twenty-First Century Skills. Handbook of Vocational Education and Training, 1–15. https://doi.org/10.1007/978-3-319-49789-1_72-1
Jilcha Sileyew, K. (2020). Systematic Industrial OSH Advancement Factors Identification for Manufacturing Industries: A Case of Ethiopia. Safety Science, 132(November 2019), 104989. https://doi.org/10.1016/j.ssci.2020.104989
Khurniawan, A. W., & Erda, G. (2019). Potret Tenaga Kerja Lulusan SMK Pada Industri Manufaktur. Distribution, January, 1–23.
Kusumayati, D. (2020). Determinasi Kompensasi, Motivasi, Stres, Kepuasan Kerja dan Kinerja Karyawan (Suatu Kajian Studi Literatur Manajemen Sumber Daya Manusia). Jurnal Ekonomi Manajemen Sistem Informasi, 2(2), 1–19.
Liem, A., & Sutanto, E. (2019). Pengaruh Kepuasan Pada Gaji Dan Loyalitas Karyawan Pada Kinerja Karyawan Pt Remaja Service di Kupang. Agora, 7(2), 287-294.
Michaelis, C., & Seeber, S. (2019). Competence-Based Tests: Measurement Challenges of Competence Development in Vocational Education and Training. Handbook of Vocational Education and Training, 1339–1358. https://doi.org/10.1007/978-3-319-94532-3_83
Mulder, M. (2019). Foundations of Competence-Based Vocational Education and Training. Handbook of Vocational Education and Training, 1–26. https://doi.org/10.1007/978-3-319-49789-1_65-1
Plenkina, V. V., & Osinovskaya, I. V. (2018). Improving the System of Labor Incentives and Stimulation in Oil Companies. Entrepreneurship and Sustainability Issues, 6(2), 912–926. https://doi.org/10.9770/jesi.2018.6.2(29)
Sani, F. O. Ü., Yozgat, U., & Çakarel, T. Y. (2016). How employees’ perceptions of competency models affect job satisfaction? Mediating effect of social exchange. Academy of Strategic Management Journal, 15(2), 36–46.
Simatupang, B. S. B., & Kartikasari, D. (2017). Tingkat Gaji Karyawan (Studi Pada Pt Nok Precision Component Batam). Journal of Applied Business Administration, 1(1), 74–81.
Susilo, W., Moedjiman, Sumiarso, L., & Dana, I. M. (2018). Sistem Kompetensi Nasional Berbasis KKNI & SKKNI (A. Prabawati (ed.)).
Vaisburd, V. A., Simonova, M. V., Bogatyreva, I. V., Vanina, E. G., & Zheleznikova, E. P. (2016). Productivity of Labour and Salaries in Russia: Problems and Solutions. International Journal of Economics and Financial Issues, 6(5), 157–165.
Werquin, P. (2010). Recognising Non-Formal and Informal Learning. In Recognising Non-Formal and Informal Learning. https://doi.org/10.1787/9789264063853-en
Wheelahan, L. (2015). Not Just Skills: What a Focus on Knowledge Means for Vocational Education. Journal of Curriculum Studies, 47(6), 750–762. https://doi.org/10.1080/00220272.2015.1089942
Wicaksono, H. N., Pratama, G. N., Arnito, M. V. Y., Mardiatno, & Kristianto, R. (2020). Retrofit Mesin CNC Edulathe dengan Controller Sinumerik 808D. Industrial and Mechanical Design Conference, 2, 229–236.
Widiyaningsih, S. T., & Irwanto. (2021). Proses Pengoperasian Mesin Running Saw Menggunakan Computer Numerical Control (CNC) (Studi Kasus di PT. Sejin Lestari Furniture). Aisyah Journal of Informatics And Electrical Engineering Universitas Aisyah Pringsewu, 3(1), 75–87.
Widyanata, M., Agarian, V., Pranoto, T., & Adelina, Y. E. (2019). Analisis Desain Sistem Biaya Standar: Studi Kasus Pt Kw. Jurnal Profita, 12(2), 249. https://doi.org/10.22441/profita.2019.v12.02.006
DOI: http://dx.doi.org/10.17977/jptpp.v6i6.14867
Refbacks
- There are currently no refbacks.
Copyright (c) 2021 Achmad Romadin, Yoto Yoto, Didik Nurhadi
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Jurnal Pendidikan: Teori, Penelitian, & Pengembangan Journal of Education: Theory, Research, and Development Graduate School Of Universitas Negeri Malang
|
