Email this article 
Model Kelas Industri pada Mitsubishi School Program di Sekolah Menengah Kejuruan
Abstract
Abstract: The focus of learning in Vocational High Schools needs to be emphasized on the mastery of skills, knowledge, attitudes and values needed by industry. This study aims to describe the industrial class model in the Mitsubishi School Program that has been carried out in Vocational High School. The research method this is a qualitative approach with type of descriptive research, object of research is Private Vocational High School Muhammadiyah 6 Rogojampi on MSP industrial grade automotive engineering expertise program. The results of this study are industrial class model begins planning by collaborating with the school and industry and continued with the collaboration of the preparation of the industrial class curriculum between the VHC curriculum and industrial qualifications. The implementation process is adjusted to the curriculum that has been prepared. The evaluation of the industrial class program is carried out after the process of implementing the industrial class by both parties.
Abstrak: Fokus pembelajaran di SMK perlu menekankan penguasaan keterampilan, pengetahuan, sikap, dan nilai-nilai yang dibutuhkan industri. Tujuan dalam penelitian ini adalah mendeskripsikan model kelas industri pada Mitsubishi School Program yang telah dilakukan di SMK. Metode penelitian ini menggunakan pendekatan kualitatif dengan jenis penelitian deskriptif, objek penelitiannya yaitu SMK Muhammadiyah 6 Rogojampi pada program keahlian teknik otomotif kelas industri Mitsubishi School Program. Hasil penelitian didapatkan model kelas industri diawali perencanaan dengan melakukan kerjasama antara pihak sekolah dengan industri dan dilanjutkan dengan kolaborasi penyusunan kurikulum kelas industri antara kurikulum SMK dan kualifikasi industri. Proses pelaksanaan disesuaikan dengan kurikulum yang telah disusun. Evaluasi program kelas industri dilaksanakan setelah proses pelaksanaan kelas industri oleh kedua belah pihak.Keywords
Full Text:
PDFReferences
Anggraeni, C. W. (2018). Promoting Education 4.0 in English for Survival Class: What are the Challenges?.Methathesis: Journal of English Language, Literature, and Teaching, 2(1), 12—24. DOI: 10.31002/metathesis.v1i2.676
Arikunto, S. (2013). Prosedur Penelitian Suatu Pendekatan Praktik. Jakarta: Rineka Cipta.
Arroyo, R. A. (2011). Practicum Performance in Singapore and the Philippines of Hospitality Students in a State University. Asian Journal of Business Governance Business Education Section, 1(1), 145—166.
Atmawati., Samsudi., & Sudana, I. M. (2017). Keefektifan Pelaksanaan Praktik Kerja Lapangan Berbasis Industri pada Kompetensi Keahlian Teknik Audio Video. Journal of Vocational and Career Education, 2(2), 1—8.
Austin, M. J. & Rust, D. Z. (2015). Developing an Experiential Learning Program: Milestones and Challenges. International Journal of Teaching and Learning in Higher Education, 27(1), 143—153.
Burns, C., & Chopra. (2017). A Meta-analysis of the Effect of Industry Engagement on Student Learning in Undergraduate Programs. The Journal of Technology, Management, and Applied Engineering, 33(1), 2—20
Cahyanti, S. D., Indriayu, M., & Sudarno. (2018). Implementasi Program Link and Match dengan Dunia Usaha dan Dunia Industri pada Lulusan Pemasaran SMK Negeri 1 Surakarta. BISE: Jurnal Pendidikan Bisnis dan Ekonomi, 4(1), doi:10 .20961/bise.v4i1.20 028.
Ejiwale, J. A. (2013). Barriers to Successful Implementation of STEM Education. Journal of Education and Learning, 7(2), 63—74.
Garba, S. A., & Busthami, A. H. (2015). Toward the Use of 21st Century Teaching Learning Approaches: The Trend of Development in Malaysian Schools within the Context of Asia Pacific. Journal iJet, 10(4), 72—80.
Gentelli, L. (2015). Using Industry Professionals in Undergraduate Teaching: Effects on Student Learning. Journal of University Teaching & Learning Practice, 12(4), http://ro.uow.edu.au/jutlp/vol12/iss4/4
Gharehbaghi, K. (2015). The Importance of Industry Links in Teaching Pedagogy: A Higher Education Prospective. American International Journal of Contemporary Reseach, 5(1), 17—24.
Hariharasudan, A. & Kot, S. (2018). A Scoping Review on Digital English and Education 4.0 for Industry 4.0. Social Sciences. 7(227), doi:10.3390/socsci7110227
Hussin, A. A. (2018). Education 4.0 Made Simple: Ideas for Teaching. Journal IJELS, 6(3), 92—99.
Johan, K. (2015). Perception of Students Towards Lecturers Teaching Engineering Courses With Industry Experience: A Case Study In Malaysia Technical University. Procedia Elsevier. doi: 10.1016/j.sbspro.2015.06.372
Kartikawati, S., & Robianto, R. F. (2016). Pengaruh Pelaksanaan Praktik Industri (Pi) terhadap Motivasi Belajar Siswa Kelas XI Il SMK N 1 Wonoasri. Jupiter, 1(1), 26—34.
Nor, M. M, & Ismail, S. (2015). Effect of Industrial Training On Academic Performance: Evidence from Malaysia. Journal JTET, 7(2), 44—54.
Oktaviastuti, B. Dardiri, A., & Nindyawati. (2016). Meningkatkan Technical Skill Siswa SMK Teknik Bangunan melalui Pelaksanaan Praktik Kerja Industri. Jurnal Pendidikan: Teori, Penelitian, dan Pengembangan, 1(4), 681—685.
Pratama, P., & Bintang, S. (2015). Penerapan Strategi Pembelajaran Pelatihan Industri (Training Within Industri) terhadap Aktivitas dan Hasil Belajar Instalasi Motor Listrik. Jurnal Pendidikan Teknologi dan Kejuruan, 17(2), 73—79.
Prasetyo, Y. D., Tiwan., & Soemowidagdo, A. L. (2018). Pengaruh Praktik Industri terhadap Hard Skill Siswa SMK pada Program Keahlian Teknik Pemesinan. Jurnal Dinamika Vokasional Teknik Mesin, 3(2), 87—93.
Prastyawan, Y. I. (2017). Manajemen Pembelajaran Berbasis Industri. Manajemen dan Supervisi Pendidikan, 1(2), 176—180.
Rani, N. A., Aziz, F. A., & Rohidatun, M. W. (2018). The Effectiveness of Interactive Learning in Manufacturing Engineering. Journal of Engineering and Science Research, 2(6), 10—16.
Rizki, N. A., Suyadi, B., & Sedyati, R. N. (2017). Pengaruh Praktik Kerja Industri terhadap Kemampuan Penguasaan Hardskill Siswa Kelas XI Program Keahlian Teknik Komputer dan Jaringan SMK Negeri 5 Jember. Jurnal Pendidikan Ekonomi: Jurnal Ilmiah Ilmu Pendidikan, Ilmu Ekonomi, dan Ilmu Sosial, 11(2), 89—95.
Sackey, S. M., Bester, A., & Adams, D. (2017). Industry 4.0 Learning Factory Didactic Design Parameters for Industrial Engineering Education in South Africa. The South Africa Journal of indestrial Engineering, 28(1), 114—124.
Saputra, I., Permana, T., & Sriyono. (2017). Evaluasi Implementasi Praktik Kerja Industri di SMK. Journal of Mechanical Engineering Education, 4(2), 185—190.
Shahroom, A. A., & Hussin, N. (2018). Industrial Revolution 4.0 and Education. Intenational Journal of ARBSS, DOI: 10.6007/IJARBSS/v8-i9/4593.
Shariff, S. M., & Muhamad. M. (2011). Learning in an Industrial Practicum Training Program: A Case Study in a Public University in Malaysia. World Applied Sciences Journal, 11(11), 1361—1368.
Siregar, R. F., & Tambunan, B. H. (2017). Hubungan Pengalaman Praktik Kerja Lapangan Industri (PKLI) dengan Kesiapan Kerja Siswa Sesuai Standar Kompetensi Kerja Nasional Indonesia (SKKNI) Kelas XII Paket Keahlian Teknik Kendaraan Ringan SMK Negeri 2 Medan. Jurnal Pendidikan Teknologi dan Kejuruan, 19(1), 32—39.
Sugiyono. (2016). Metode Penelitian Kombinasi. Bandung: Alfabeta.
Suroto. (2017). Model Perencanaan Sekolah Menengah Kejuruan Penyelenggara Kelas Standar Industri. Jurnal Taman Vokasi, 2(5), 204—211.
Sutikno, T. A. (2015). Membangun Kerjasama Sekolah Menengah Kejuruan dan Industri untuk Ketersesuaian Kompetisi Lulusan. Jurnal Teknologi Elektro dan Kejuruan, 23, 42—50.
Tabius, E. B. (2015). Business’ Students Industrial Training: Performance and Employment Opportunity. International Journal of Scientific and Research Publications, 5(5), 1—4.
Taylor, L., & Parsons, J. (2011). Improving Student Engagement. Current Issues in Education, 14(1), 1—33.
Wibowo, N. (2016). Upaya Memperkecil Kesenjangan Kompetensi Lulusan Sekolah Menengah Kejuruan Dengan Tuntutan Dunia Industri. Jurnal Pendididkan Teknologi dan Kejuruan, 23(1), 45—50.
Widiyanti., Solichin., & Yoto. (2017). Kerjasama Sekolah Menengah Kejuruan dan Industri (Studi Kasus Pendidikan Kelas Industri SMK Nasional Malang dengan Astra Honda Motor). Jurnal Teknologi, Kejuruan, dan Pengajarannya, 40(2), 181—192.
Yoto. (2014). Model “Diklastri” sebagai Alternatif Meningkatkan Mutu Lulusan SMK. Jurnal Pendidikan Sains, 2(3), 125—131.
DOI: http://dx.doi.org/10.17977/jptpp.v5i8.13878
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 Hamzah Achsani, Djoko Kustono, Syarif Suhartadi
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Jurnal Pendidikan: Teori, Penelitian, & Pengembangan Journal of Education: Theory, Research, and Development Graduate School Of Universitas Negeri Malang
|
